Salon and nail supply distributors
A consumable that wears out and comes back on reorder, rather than a one-off purchase.
Nail Buffer Blocks · NB02
Colored High-Density Foam Four-Sided Sanding Block
A four-sided sanding block in high-density EVA foam with a sandpaper face — 4 g per unit at 9.5 × 2.5 × 2.5 cm, supplied in a mixed colour range. MOQ 1,000 pcs per style, production 15–30 days after order confirmation, sampling 7–15 days.
1,000 pcsMOQ per style
15–30 daysProduction
9.5 × 2.5 × 2.5 cmUnit size
We reply within 24 hours on business days
- High-density foam that springs back instead of crushing — the photograph of the block being squeezed is the point of the SKU.
- Four faces on one block, so one item covers shaping, refining and polishing.
- 4 g per unit at 2.5 cm square, so a 1,000-piece run packs flat and air freight stays economical.
- Supplied in a mixed colour range — the photographs show blue, green, orange, pink and yellow.
- Colour, artwork and packing are all set on your order.
Specifications
NB02 Specifications
Every figure above comes from the production spec of this style; colour, print and packing are confirmed on your order.
Grit note: grit numbers describe abrasive coarseness, not a quality grade. A lower number removes more material and is used for shaping and shortening; a higher number gives a finer finish. Buffing blocks usually run a coarser face and a finer face on the same body, and standard grits we run are 80, 100, 150, 180 and 240.
- SKU
- NB02
- Material
- High-density EVA foam + sandpaper faces
- Grit
- 100/180
- Faces
- Four
- Shape
- Square-section block with rounded corners
- Size
- 9.5 × 2.5 × 2.5 cm (L × W × T)
- Unit weight
- 4 g
- None on the supplied samples — a clean surface for your own artwork
- Washable / disinfectable
- Washable — yes. Disinfectable: confirm at quotation.
- Catalogue colors
- Colorful — blue, green, orange, pink, yellow in the supplied range
- Custom colors
- Yes — set per order
- Logo methods
- Printed or hot-stamped on the block body — exact method confirmed at quotation
- Packing
- Box or OPP bag
- MOQ
- 1,000 pcs / style
- Sampling
- 7–15 days, quoted separately from bulk
- Production lead time
- 15–30 days after order confirmation
Choosing A Grit
Where the grit pair Sits In The Nail Buffer Blocks Range
Use the grit pair to place this style against the rest of the collection before you shortlist.
- 80/100
- The coarsest pair we run —shaping and shortening, acrylic and gel work, and files that see heavy salon use.
- 100/180
- The all-round pair most distributors order: one side to shape, one side to refine.
- 180/240
- The finest pair —edge refinement, natural nails and finishes before buffing.
- Density
- High-density foam holds its edge under pressure instead of collapsing, which is what keeps a sanding block flat enough to work the nail evenly.
- Better for
- Buyers who want a plain, unprinted block they can brand themselves —the supplied samples carry no print at all.
- Photographs on this page
- Real photographs of this style, supplied with the SKU sheet.
Where This Style Sells
Three Ways Buyers Use This Block
Own-label and private label ranges
The supplied samples are unprinted, so the whole surface is free for your artwork —see custom and private label options.
Hardware and craft channels
The same block is sold for craft and model sanding, which widens the shelf it can sit on.
The Retail Case
What Your Customer Sees
A buffer block is the item a customer reaches for after the file, which makes it the second consumable in the basket rather than an add-on. It is also the item a salon replaces most often, because the abrasive faces wear flat long before the sponge does.
The four points opposite are read off this style's own specification —material, size, colour range and repeat use —so you can put them straight into your own listing copy.
- Holds its edge
- High-density foam springs back rather than compressing, so the face stays flat and the block works evenly.
- Full print surface
- The supplied samples carry no print, so the whole block is available for your own artwork.
- Light and compact
- 4 g per unit, so a 1,000-piece run packs flat and air freight stays economical.
- The repeat item
- Abrasive faces wear flat with use —the block is bought again, not replaced once.
Custom & Private Label
Make It Yours
This style can be produced with your colour, your logo and your packing —the minimum stays 1,000 pcs / style. Full options are on the custom and private label page.
01ColourColorful — blue, green, orange, pink, yellow (custom colours per order)
02Size9.5 × 2.5 × 2.5 cm —confirmed per order
03LogoPrinted on the block body, artwork supplied by you
04PackingBox or OPP bag, set per order
FAQ
Questions About NB02
Answers for this style. Anything else, ask us —we reply within 24 hours on business days.
What is this block made of?+
High-density EVA foam with a sandpaper face, quoted as EVA + sandpaper on the SKU sheet.
Is it flexible or rigid?+
It flexes and returns — the supplied photograph shows the block being squeezed and springing back, which is the point of the high-density foam.
Which grits are on the four faces?+
This style is specified as 100/180, and a multi-face block steps through grades across its faces. The full sequence is confirmed on your order. Standard grits we run are 80, 100, 150, 180 and 240.
Is the block printed?+
No. The supplied samples are plain, so the whole surface is available for your own artwork.
Can we get a sample before bulk?+
Yes. Sampling takes 7–15 days and is quoted separately from bulk production, which then runs 15–30 days after order confirmation.
Related Styles
All styles →
More From Nail Buffer Blocks
Request A Quote
Get Pricing For NB02
Send your quantity, colour split and destination. We reply within 24 hours on business days with price, lead time and sample options.
- 1,000 pcs / style
- Production 15–30 days
- Sampling 7–15 days
- Custom logo & private label
Prefer to talk? WhatsApp +86 136 8062 1175 · angel@yjlovy.com