Retail and pharmacy beauty chains
A printed range merchandises as a set: mixed designs in one tray read as a collection rather than a single SKU.
Nail Files · NF11
Ultra-Thin Custom-Designed Printed Sandpaper Wooden Nail File
An ultra-thin wooden nail file built on a 0.15 cm board with a sandpaper face, printed across the whole face and supplied as a multi-design range — 17.8 × 2.8 cm and 4.2 g per unit. MOQ 1,000 pcs per style, production 15–30 days after order confirmation, sampling 7–15 days.
1,000 pcsMOQ per style
15–30 daysProduction
17.8 × 2.8 × 0.15 cmUnit size
We reply within 24 hours on business days
- 0.15 cm thick and 4.2 g per unit — the thinnest file we quote, which is what makes a full-face printed design practical.
- The face is a print surface: the supplied range carries cartoon, floral and lettering designs at the same size.
- Grit numbers are printed as part of the design — the plain samples read 100/180 and the printed range also reads 180/240.
- One set-up covers many designs, which is what makes short design runs possible at a 1,000-piece minimum.
- Colour, artwork and packing are all set on your order.
Specifications
NF11 Specifications
Every figure above comes from the production spec of this style; colour, print and packing are confirmed on your order.
Grit note: grit numbers describe abrasive coarseness, not a quality grade. A lower number removes more material and is used for shaping and shortening; a higher number gives a finer finish. Standard grits we run are 80, 100, 150, 180 and 240, usually combined as 80/100, 100/180 or 180/240 on a two-sided file.
- SKU
- NF11
- Material
- Wooden board + sandpaper
- Grit
- 100 / 180 on the plain samples; 180/240 also appears across the printed range
- Shape
- Straight — flat wooden body with rounded ends
- Size
- 17.8 × 2.8 × 0.15 cm (L × W × T)
- Unit weight
- 4.2 g
- Sides
- Double-sided
- Full-face print; several designs in the supplied range
- Washable / disinfectable
- Washable — yes. Disinfectable: confirm at quotation.
- Replaceable abrasive
- No
- Catalogue colors
- Colorful — printed range on a light ground
- Custom colors
- Yes — set per order
- Logo methods
- Full-face print; your own artwork replaces the catalogue design
- Packing
- Box or OPP bag
- MOQ
- 1,000 pcs / style
- Sampling
- 7–15 days, quoted separately from bulk
- Production lead time
- 15–30 days after order confirmation
Choosing A Grit
Where 100/180 Sits In The Nail Files Range
Use the grit pair to place this style against the rest of the collection before you shortlist.
- 80/100
- The coarsest pair we run —shaping and shortening, acrylic and gel work, and files that see heavy salon use.
- 100/180
- The all-round pair most distributors order: one side to shape, one side to refine.
- 180/240
- The finest pair —edge refinement, natural nails and finishes before buffing.
- 0.15 cm ultra-thin
- The thinnest build in the range, which keeps a full-face printed file light enough for promotional and mailer use.
- Better for
- Buyers who want several different printed designs out of one 1,000-piece order.
- Photographs on this page
- Real photographs of this style, supplied with the SKU sheet.
Where This Style Sells
Three Ways Buyers Use This File
Own-label and licensed ranges
Your own artwork replaces the catalogue design across the whole face —see custom and private label options.
Promotional and mailer programmes
4.2 g and 0.15 cm means the file posts flat, which is what keeps a printed insert cheap to distribute —see custom and private label options.
The Retail Case
What Your Customer Sees
A nail file is bought the moment a customer notices their nail has caught, which makes it an impulse item rather than a considered purchase. It is also the item a salon runs out of first, because it wears out.
The four points opposite are read off this style's own specification —material, size, colour range and repeat use —so you can put them straight into your own listing copy.
- Thinnest build we quote
- 0.15 cm thick and 4.2 g per unit —the file stays flat in a mailer while the printed face still reads clearly.
- The face is the sell
- The design covers the whole file, so a tray of mixed designs merchandises as a collection rather than a pile of blanks.
- Your artwork, not a badge
- A full-face print takes a character, a pattern or lettering —not just a small logo in the corner.
- The repeat item
- Abrasive wears with use —the file is bought again, not replaced once.
Custom & Private Label
Make It Yours
This style can be produced with your colour, your logo and your packing —the minimum stays 1,000 pcs / style. Full options are on the custom and private label page.
01ColourColorful — printed range on a light ground (custom per order)
02Size17.8 × 2.8 × 0.15 cm —confirmed per order
03LogoPrinted on the file body, artwork supplied by you
04PackingBox or OPP bag, set per order
FAQ
Questions About NF11
Answers for this style. Anything else, ask us —we reply within 24 hours on business days.
How thin is this file?+
0.15 cm, at 4.2 g per unit — the thinnest build in the nail files range we quote.
Can we print our own artwork on the whole face?+
Yes. The face is a full print surface, so a design of your own covers it rather than a small badge in the corner.
What grit do the samples carry?+
The plain samples read 100/180 and the printed range also carries 180/240. The pair is confirmed on order.
How many designs can one order cover?+
A single set-up covers several designs, so mixed designs can be quoted inside the 1,000-piece minimum. Tell us how many you need at quotation.
Can we get a sample before bulk?+
Yes. Sampling takes 7–15 days and is quoted separately from bulk production, which then runs 15–30 days after order confirmation.
Related Styles
All styles →
More From Nail Files
Request A Quote
Get Pricing For NF11
Send your quantity, colour split and destination. We reply within 24 hours on business days with price, lead time and sample options.
- 1,000 pcs / style
- Production 15–30 days
- Sampling 7–15 days
- Custom logo & private label
Prefer to talk? WhatsApp +86 136 8062 1175 · angel@yjlovy.com